תרכובת הזרקה
בית > Hoses > תרכובות PVC > תרכובת הזרקה
טרפלקס מציעה מגוון רחב של תרכובות הזרקה גמישות, המספקות איכות משטח ותפוקה מעולים בשילוב עם המאפיינים והתכונות החיוניות ליישום.
היועצים הטכניים שלנו ישמחו לסייע לך בקביעה איזו כיתה תשרת את הצרכים שלך בצורה הטובה ביותר.
מידות
345 Natural
Application: Flexible injection molding| Properties | Test Method | Units | Standard |
|---|---|---|---|
| Density | ASTM D792 | gr/cm3 | 1.29-1.33 |
| Hardness | ASTM D 2240 | SHORE A | 76-80 |
| Tensile Strength | ASTM D 638 | n/mm2 | > 14 |
| Elongation | ASTM D 638 | % | > 300 |
| Thermal Stability | 180°C | minutes | > 60 |
399 TR
Application: Very Soft Injection compound| Properties | Test Method | Units | Standard |
|---|---|---|---|
| Density | ASTM D792 | gr/cm3 | 1.12-1.16 |
| Hardness | ASTM D 2240 | SHORE A | 36-42 |
| Tensile Strength | ASTM D 638 | n/mm2 | > 6 |
| Elongation | ASTM D 638 | % | > 450 |
| Thermal Stability | 180°C | minutes | > 60 |
374 TR
Application: Bathroom Rugs| Properties | Test Method | Units | Standard |
|---|---|---|---|
| Density | ASTM D792 | gr/cm3 | 1.16-1.20 |
| Hardness | ASTM D 2240 | SHORE A | 56-62 |
| Tensile Strength | ASTM D 638 | n/mm2 | > 7 |
| Elongation | ASTM D 638 | % | > 300 |
| Thermal Stability | 180°C | minutes | > 60 |
358 TR
Application: Injection molding shoe seals| Properties | Test Method | Units | Standard |
|---|---|---|---|
| Density | ASTM D792 | gr/cm3 | 1.25-1.29 |
| Hardness | ASTM D 2240 | SHORE A | 65-71 |
| Tensile Strength | ASTM D 638 | n/mm2 | > 12.5 |
| Elongation | ASTM D 638 | % | > 306 |
| Thermal Stability | 180°C | minutes | > 60 |
377 NAT
Application: Injection molding shoe seals| Properties | Test Method | Units | Standard |
|---|---|---|---|
| Density | ASTM D792 | gr/cm3 | 1.20-1.24 |
| Hardness | ASTM D 2240 | SHORE A | 63-69 |
| Tensile Strength | ASTM D 638 | n/mm2 | > 11 |
| Elongation | ASTM D 638 | % | > 300 |
| Thermal Stability | 180°C | minutes | > 60 |
379 NAT
Application: Injection molding Upper shoes & Boots| Properties | Test Method | Units | Standard |
|---|---|---|---|
| Density | ASTM D792 | gr/cm3 | 1.20-1.26 |
| Hardness | ASTM D 2240 | SHORE A | 48-56 |
| Tensile Strength | ASTM D 638 | n/mm2 | > 6 |
| Elongation | ASTM D 638 | % | > 300 |
| Thermal Stability | 180°C | minutes | > 60 |
385 BK
Application: Oil resistant shoe seals| Properties | Test Method | Units | Standard |
|---|---|---|---|
| Density | ASTM D792 | gr/cm3 | 1.19-1.23 |
| Hardness | ASTM D 2240 | SHORE A | 57-63 |
| Tensile Strength | ASTM D 638 | n/mm2 | > 12.5 |
| Elongation | ASTM D 638 | % | > 400 |
| Thermal Stability | 180°C | minutes | > 60 |
398 TR
Application: Bath rugs| Properties | Test Method | Units | Standard |
|---|---|---|---|
| Density | ASTM D792 | gr/cm3 | 1.14-1.18 |
| Hardness | ASTM D 2240 | SHORE A | 46-52 |
| Tensile Strength | ASTM D 638 | n/mm2 | > 6.5 |
| Elongation | ASTM D 638 | % | > 380 |
| Thermal Stability | 180°C | minutes | > 60 |
528 Natural / Black
Application: Rigid Injection molding| Properties | Test Method | Units | Standard |
|---|---|---|---|
| Density | ASTM D792 | gr/cm3 | 1.38-1.48 |
| Hardness | ASTM D 2240 | SHORE D | 69-75 |
| Tensile Strength | ASTM D 638 | n/mm2 | > 20 |
| Elongation | ASTM D 638 | % | > 20 |
| Thermal Stability | 200°C | minutes | > 60 |