Compuesto para inyección de moldes
Terraflex ofrece una amplia gama de compuestos flexibles para moldeado de inyección que proporcionan una excelente calidad de superficie y salida, combinados con las propiedades y características esenciales para la aplicación correspondiente.
Nuestros consultores técnicos con gusto lo asistirán para que determine el grado que mejor se ajuste a sus necesidades.
Tallas
345 Natural
Application: Flexible injection molding| Properties | Test Method | Units | Standard |
|---|---|---|---|
| Density | ASTM D792 | gr/cm3 | 1.29-1.33 |
| Hardness | ASTM D 2240 | SHORE A | 76-80 |
| Tensile Strength | ASTM D 638 | n/mm2 | > 14 |
| Elongation | ASTM D 638 | % | > 300 |
| Thermal Stability | 180°C | minutes | > 60 |
399 TR
Application: Very Soft Injection compound| Properties | Test Method | Units | Standard |
|---|---|---|---|
| Density | ASTM D792 | gr/cm3 | 1.12-1.16 |
| Hardness | ASTM D 2240 | SHORE A | 36-42 |
| Tensile Strength | ASTM D 638 | n/mm2 | > 6 |
| Elongation | ASTM D 638 | % | > 450 |
| Thermal Stability | 180°C | minutes | > 60 |
374 TR
Application: Bathroom Rugs| Properties | Test Method | Units | Standard |
|---|---|---|---|
| Density | ASTM D792 | gr/cm3 | 1.16-1.20 |
| Hardness | ASTM D 2240 | SHORE A | 56-62 |
| Tensile Strength | ASTM D 638 | n/mm2 | > 7 |
| Elongation | ASTM D 638 | % | > 300 |
| Thermal Stability | 180°C | minutes | > 60 |
358 TR
Application: Injection molding shoe seals| Properties | Test Method | Units | Standard |
|---|---|---|---|
| Density | ASTM D792 | gr/cm3 | 1.25-1.29 |
| Hardness | ASTM D 2240 | SHORE A | 65-71 |
| Tensile Strength | ASTM D 638 | n/mm2 | > 12.5 |
| Elongation | ASTM D 638 | % | > 306 |
| Thermal Stability | 180°C | minutes | > 60 |
377 NAT
Application: Injection molding shoe seals| Properties | Test Method | Units | Standard |
|---|---|---|---|
| Density | ASTM D792 | gr/cm3 | 1.20-1.24 |
| Hardness | ASTM D 2240 | SHORE A | 63-69 |
| Tensile Strength | ASTM D 638 | n/mm2 | > 11 |
| Elongation | ASTM D 638 | % | > 300 |
| Thermal Stability | 180°C | minutes | > 60 |
379 NAT
Application: Injection molding Upper shoes & Boots| Properties | Test Method | Units | Standard |
|---|---|---|---|
| Density | ASTM D792 | gr/cm3 | 1.20-1.26 |
| Hardness | ASTM D 2240 | SHORE A | 48-56 |
| Tensile Strength | ASTM D 638 | n/mm2 | > 6 |
| Elongation | ASTM D 638 | % | > 300 |
| Thermal Stability | 180°C | minutes | > 60 |
385 BK
Application: Oil resistant shoe seals| Properties | Test Method | Units | Standard |
|---|---|---|---|
| Density | ASTM D792 | gr/cm3 | 1.19-1.23 |
| Hardness | ASTM D 2240 | SHORE A | 57-63 |
| Tensile Strength | ASTM D 638 | n/mm2 | > 12.5 |
| Elongation | ASTM D 638 | % | > 400 |
| Thermal Stability | 180°C | minutes | > 60 |
398 TR
Application: Bath rugs| Properties | Test Method | Units | Standard |
|---|---|---|---|
| Density | ASTM D792 | gr/cm3 | 1.14-1.18 |
| Hardness | ASTM D 2240 | SHORE A | 46-52 |
| Tensile Strength | ASTM D 638 | n/mm2 | > 6.5 |
| Elongation | ASTM D 638 | % | > 380 |
| Thermal Stability | 180°C | minutes | > 60 |
528 Natural / Black
Application: Rigid Injection molding| Properties | Test Method | Units | Standard |
|---|---|---|---|
| Density | ASTM D792 | gr/cm3 | 1.38-1.48 |
| Hardness | ASTM D 2240 | SHORE D | 69-75 |
| Tensile Strength | ASTM D 638 | n/mm2 | > 20 |
| Elongation | ASTM D 638 | % | > 20 |
| Thermal Stability | 200°C | minutes | > 60 |